NE8-15E 15升保溫箱

Product Name :

NE8-15E 

Product Description :

15 Litre Incubator. New 2009 

Nominal Tank Capacity :

15 litre chamber Working capacity of the chamber can be smaller.

Size selector :

«Smaller  Larger»15

Product Specification :

An economical range of Clifton Incubators featuring precision temperature control up to 70°C suited for incubations. Featuring wipe clean touch pad controls digital display of set and actual temperatures.

This model a 15 litre capacity Incubator supplied with 1 standard shelf with optional wire and perforated shelves up to maximum capacity of 2.

Temperature

Range: ambient +5°C - 70°C.

Microprocessor control, single temperature probe.

Auto diagnostic system.

Digital display to 1°C resolution.

Sensitivity @ 37°C ±0.5°C On wire shelf in middle chamber.

Calibration Certificate @ 37°C.

Temperature and time programmable

One segment temperature-time profile with delay ON, 13 and timer at set-point from 1 minute to 99 hours.

Timer activated once set point is reached 12

Continuous mode at set point with option timer up to 99 hours

Manual Air-flap control.

Over-temperature protection

Class 1, operates +10°C above maximum temperature 7

Temperature sensor fail alarm.

Power failure control with auto resume.

Chamber

Natural air circulation.

Using a 304 spec stainless steel interior for long working life and easy cleaning.

Solid door seals chamber.

Each shelf can support loads up to 10kg.

Durable

Body stainless steel, powder coated exterior, chemical resistant paint.

Chemical resistant splash proof controls.  

Internal Dimensions :

320w x 200d x 240h mm

External Dimensions :

440w x 350d x 520h mm

Temperature Range :

Ambient +5°C - 70°C

Sensitivity/temperature stability @45°C :

±0.5°C @ 37°C Sensitivity measurements based on temperature readings on shelf in centre of the chamber.

Temperature setting/control :

Wipe clean controls/Keypad setting/Digital display/Microprocessor control.

Temperature display resolution :

Digital display of actual measured temperature in increments of 1°C

Warranty Period :

3 Years

Safety features :

·  Class 1 thermal cut out, 7 operates +10°C above maximum temperature.

·  Temperature sensor fail alarm.

·  Power failure control with auto resume.

Safety Class :

1

Power consumption (W) @ 220-240V:

300W

Voltage :

230V

Packed Weight :

30kg

Packed Dimensions :

58x49x60cm,

Notes :

·  A range of ‘factory fit’ options are listed below as Accessories.

·  Before ordering please check the room or building access where this unit will be installed and electrical power requirements.

·  Sensitivity measurements based on temperature readings on shelf in centre of the chamber.

·  Working capacity of chamber can be smaller.

·  Incubators up to 112 litres are stackable.

·  Do not place in direct sunlight and allow a 100mm air gap away from wall at rear. Ensure there is a minimum 300mm air gap from top of the unit to ceiling.