Accuracy: |
Better than 20%; 10% typical |
Readout: |
0.03 - 2.00 ppm in 0.01 ppm increments |
Outputs: |
NO/NC contacts & 4-20mA |
Relay Ratings: |
5 Amps at 250V AC |
Lowest reading: |
0.03 ppm |
Protection Specifications: |
IP 52. Enclosure is polycarbonate. Front cover is clear polycarbonate |
Warm-Up: |
1 hour |
Response Time: |
20-30 seconds |
Supply Water Pressure: |
15 - 90 PSI |
Water Temperature Range: |
68 to 86 F (20-30 deg C)--unless re-calibrated for a specific temperature |
Power Source: |
12 VDC 800 mA [AC Adapter included] |
Requirements: |
|
Water feed at > 14 psi (1 bar) | |
0.15 liters/minute (3 gallons/hour) flow to drain or reclaim | |
Calibration: |
Sensor must be calibrated monthly to a coloremetric standard on a weekly basis for best accuracy. |
Note: |
DOM-1 can measure ozone accurately up to 150 PPM when used with a specially calibrated UV-100 Ozone Analyzer! - Call for details |
Warranty: |
1 year |