久久av三级娱乐视觉盛宴,欧美XXXX69XXXX

Easy to use - minimal training required

Rapid response time

Real time readings allow immediate response to results

Reliable electrochemical sensor

Does not require inconvenient ancillary sampling equipment or readers

Simple in-field calibration

Small, hand-held instrument

Light-weight

Optional Base Unit for continuous monitoring

The Formaldemeter htV offers a simple way to monitor levels of airborne formaldehyde in the environment. The instrument is easy to use with a simple four-button keypad and features an easy-to-read four-digit display. It employs a well-proven electrochemical formaldehyde sensor that will provide an immediate indication of formaldehyde levels. Unlike other formaldehyde monitoring devices, such as, color stain tubes and badges, the Formaldemeter htV is capable of measuring many samples consecutively without the need for inconvenient ancillary equipment. Real-time results also mean that potential overexposures can be identified as they occur, without the delay and expense associated with laboratory analysis.

Specifications

Sensor: Electrochemical
Calibration: In-field formaldehyde calibration standard
Display: 4-digit LCD
Sampling Frequency: Typically once every 3 to 5

minutes depending on previous reading
Sample Volume: Approx. 10 ml
Detection Range: 0.05-10 ppm (optional high

range: 80 ppm)
Precision: 10% at 2 ppm level
Response Time: <10 seconds
Temperature: By key interrogation, displayed in degrees C
Humidity: By key interrogation, displayed in % rH
Power: 9 volt alkaline battery
Enclosure: ABS plastic
Weight: Instrument: 10 ounces (310g)

Complete Kit: 1.75 lbs. (795g)
Dimensions: Instrument: 6 x 3.25 x 1.25 inches

(150 x 80 x 32 mm)
Carrying Case: 10.5 x 8.5 x 2 inches

(265 x 215 x 50 mm)

Applications

Formaldehyde is a common contaminant found in new construction, residential housing and commercial buildings following renovation. It is used in many products, industries and other types of activities, including:

Textile treatment
Medical labs
Laminated boards
Pharmaceuticals
Synthetic resins
Horticulture
Paints
Mortuaries

Paper products
Biological
Dye stuffs
Particle boards
Commercial buildings
Cosmetics
Residential construction
Hospitals

Cross Sensitivity Chart

Compound
Acetone
Acetaldehyde
Acetic acid
Ammonia
Butanol
Carbon monoxide
Ethylene
Ethanol
Formaldehyde
Glutaraldehyde
Methanol
Phenol
Propanol
Resorcinol

ppm to = 1 ppm reading
No Response
8-12
No Response
71000
Note (2)
100
160
12-20
1.0
7100 at 25° C, Note (3)
50
5, Note (1)
Note (2)
5, Note (1)

Notes:
(1) Completely removed with filter provided
(2) Interference above 60° C nd 20 ppm
(3)