四虎永久在线精品免费下载,久久99久久久久久密,亚洲乱亚洲乱码11p

產(chǎn)品描述：

Monitor for the WaterWatch² Range

10 to30VDC , ProfibusDPV1,1×Relay Output

The 7300w² Monitor is the core to the WaterWatch² product range,the monitor is designed to interface with all the sensors in the WaterWatch² range. The starting specification provides all the connections required for 1 or 2 sensors and systems can be created by the use of expansion boxes to include multiple sensors. The maximum number of sensors will be limited by the practicalities of most sites. We anticipate 8 being a sensible maximum although many more can be accommodated.
Combining sensors provides a very cost effective way of simultaneously monitoring parameters such as Dissolved Oxygen and Suspended Solids in an Activated Sludge Plant, or pH and Turbidity at a treatment works outfall where the sensors can be located close together.
Installations can be expanded in the future if extra measurement points or parameters are required, the monitor will not need to be replaced simply add the extra hardware and re-configure the settings.
The advanced serial communication between the monitor and sensors mean the calibration and configuration data can be preserved if either part is replaced and can be copied from sensor to sensor further reducing the time required for configuration and for maintenance. The user interface on the monitor is highly intuitive, making setup and operation straightforward to carry out. This saves time and avoids the need for specialist training, most commands are self explanatory and intuitive.

The 7300w² Monitor has been designed to make our customers lives easy. The graphical display has been chosen to provide the best possible contrast, even in bright sunlight. In normal operating mode the display gives a large digit display of the measured parameter(s), the user can also select a trend display giving an indication of site performance over the last week.
The setup and maintenance menus can be accessed by pressing the menu key and following the on-screen instructions. The membrane keypad has large 20 mm keys that have a positive action allowing use of the monitor whilst wearing gloves. The use of a touch sensitive display was considered, however this idea was rejected as feedback from our customers indicated that such displays are unreliable in outdoor, arduous applications.

We offer a range of standard installation options, ranging from a simple handrail bracket, to a package including an outer enclosure, isolator and handrail mounting struts. In addition we offer a bespoke design service to ensure that our monitoring system meets the exact requirements of your site. As with all our products we can supply these options as just the hardware or provide installation and commissioning services that fully guarantee a trouble free installation.

技術(shù)參數(shù)：

Physical

Weight	1.4 kg
Dimensions (hxwxd)	213 x 185 x 95 mm
Enclosure Rating	IP65
Enclosure Material	ABS
Cable Entries	1x M20, 4x M16, 1x M12
Cable Core Size	Max Conductor Size 2.5 mm²

Environmental Data

Operating Temperature	-20 to 70ºC
	0-95% Relative Humidity, Non-Condensing
Location	Indoor or Outdoor

Power Supply

Voltage	90-264VAC, +10/-15% Field Selectable, 50/60Hz
	9-30 VDC option available
Power Consumption	30W
	If more than two sensors are to be used then an external higher rated power supply may be necessary

User Interface

Display	Graphic LCD, Black on White, Transreflective
Viewing Area	78 x 59 m
Backlight	On/Off/On after keypress with user adjustable contrast
Membrane Keypad	6 Key pillow embossed, 20 mm diameter

Output Signals

Analogue Output	0/4-20mA, max load 750 ohm
	per measurement unelss otherwise specified
Relays	3, reduced to 1 relay when Profibus is selected
Relay Type	SPCO
Relay Rating	8A @ 30VDC
Digital Communications	PROFIBUS DP, alternative protocols available on request
Auxilliary Connections	Configurable for Remote Input or Device Power