Thickness gauge it is intended for local measurement of a thickness of galvanic coatings like this zinc, cadmium or chromium on steel, and silver or copper on titanium.
ТМ-3 has memory on 5000 results of measurements (50 files on 100 results), interface RS232 for connection to the personal computer, a mode of selective averaging of results and possibility of programming to 15 approximate scales, both from the device keyboard, and from the personal computer. Additional, deliveried special transducers with possibility to access in out-of-the-way place.
|
Possibility of record to 15 approximate scales
Adjustable brightness of the screen
The mode of selective averaging
Memory on 5000 results of measurements
The mode of temperature correction |
The mode of the automatic alarm system of defect
Mains power: 3 element "AA"
The mode of autoswitching-off
Possibility of the order of transducers of various configurations
Weight 0.3 kg |
|
ТМ-3 electronic module thickness gauge
Transducers
Cable RS232 for connection PC
Software support for PC
Operating manual
Batteries
Transport bag |
Technical Characteristics
Coating thickness measurement range
up to 0 to 100 mm
Indication accuracy
1, 0.1, 0.01 or 0.001 - is set at programming scales
Measurement accuracy
3%
The type of display
graphic LCD with switchable backlight and contarst
Dimensions screen (H х W)
21 х 56 mm
Memory results
5000 results (50 files on 100 results)
Communication with PC
interface RS232
Scales
15 programmable direct from keypad
or by PC scales, up to 10 points for
linear approximation
Software support
Dlogger
Scale
Mains power
3 element "АА"
Operating time
not less than 50 hours
Autoswitching-off
after 90 sec
Operating temperature
up to -10 C to +50 C
Base Unit Dimensions (H x W x D)
170 mm x 85 mm x 30 mm
Dimensions transducer (diameter х height)
11 mm x 60 mm
Weight
350 g
檢測設備/df－2000渦流測厚儀.jpg)
本月特價
分享儀器
檢測設備/ud2Н-pМ -低頻率探傷儀.jpg)
檢測設備/korona 1 - holiday超聲波探傷儀.jpg)
隱藏對比框